Clay-paky ALPHA SPOT HPE 700 Manuel d'utilisateur télécharger pdf (Page 22)

ALPHA SPOT HPE 700

LAMP

Used for turning lamp on and off from the projector control panel.

1) Press

the current settings appear on the display (On or Off).

2) Use the

and DOWN

keys to turn the lamp on (On) or off (Off)

3) Press

to confirm the selection or

LEFT

to keep current settings

and return to the top level.

RESET

Used for resetting the projector.

1) Press

to reset the projectors, a confirmation message (Are you sure

?) appears on the display.

2) Select YES to starting reset the fixture or NO to keep the current setting

and return to the top menu level.

CHANNEL

Used for setting channel levels from the projector control panel.

1) Press

- the first channel appears on the display.

2) Use the UP

and DOWN

keys to select the required channel:

3) Press

and use the UP

and DOWN

keys to select the

required DMX level (value between 0 and 255).

4) Press LEFT

to return to the top menu level.

TEST

Allows you to check the proper functioning of effects.

1) Press

to return to the top menu level.

2) Use the UP

and DOWN

keys to select the required test.

3) Press

to confirm the selection or LEFT

to keep current settings.

Test sequence:

Pan - Tilt effects (Pan & Tilt)

Colour effects (CMY, colour wheel)

Beam effects (Stopper-Strobe / Dimmer / Iris / Prism / Frost)

Gobo effects (Fixed gobo / Rotating gobo)

All effects

To enable the "Advanced Menu" set up the "Access code" (1234) using the

, DOWN

, RIGHT

keys.

Press

- "Menu advanced" appears on the display

UP LOAD FIRMWARE

Allows you to transfer the firmware from 1 fixture to all the connected fixtures.

1) Press

, a confirmation message appears on the display.

2) Select YES to start the firmware loading or NO to keep the current set-

ting and return to the top menu level

SETUP MODEL

Allows you to change the default model of projector.

1) Press

a confirmation message appears on the display.

2) Select YES to define the model of projector or NO to keep the current

setting and return to the top menu level.

TEST MENU

ADVANCED MENU

MANUAL CONTROL

Lamp

Manual

Control

Off

Yes

Reset

Channel

Advanced

Code

1234

Calibration

Upload

Firmware

Transfer the firmware on all

the connected fixtures ?

Are you sure ?

Yes/No

Setup

Model

Changing to a wrong model

may damage the fixture.

Are you sure ?

Yes/No

Test

Pan-Tilt

Colour

Beam

Gobo

All

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 39 40

Commentaires sur ces manuels

Pas de commentaire

Clay-paky ALPHA SPOT HPE 700 Manuel d'utilisateur Page 22

Commentaires sur ces manuels

Produits connexes et manuels pour Projecteurs Clay-paky ALPHA SPOT HPE 700