Clay-paky ALPHA WASH 700 Manuel d'utilisateur télécharger pdf (Page 18)

ALPHA WASH 700

LAMP DMX

Used for enabling lamp remote control channel.

1) Press

- the current settings appear on the display (On or Off).

2) Use the UP

and DOWN

keys to enable (On) or disable (Off)

the lamp remote control channel.

3) Press

to confirm the selection or LEFT

to keep current settings.

PAN / TILT

Invert pan

Used for reversing Pan movement.

1) Press

- the current settings appear on the display (On or Off).

2) Use the UP

and DOWN

keys to enable (On) or disable (Off)

PAN inversion.

3) Press

to confirm the selection or LEFT

to keep current settings.

Invert tilt

Used for reversing tilt movement.

1) Press

- the current settings appear on the display (On or Off).

2) Use the UP

and DOWN

keys to enable (On) or disable (Off)

Tilt inversion.

3) Press

to confirm the selection or LEFT

to keep current settings.

Swap Pan-Tilt

Used for swapping Pan and Tilt channels (as well as Pan fine and Tilt fine).

1) Press

- the current settings appear on the display (On or Off).

2) Use the UP

and DOWN

keys to enable (On) or disable (Off)

Pan and Tilt channel swap.

3) Press

to confirm the selection or LEFT

to keep current settings.

Encoder Pan-Tilt

Used for enabling the Pan / Tilt encoders.

1) Press

- the current settings appear on the display (On or Off).

2) Use the UP

and DOWN

keys to enable (On) or disable (Off)

Pan / Tilt encoders.

3) Press

to confirm the selection or LEFT

to keep current settings.

You can quickly disable the Pan and Tilt Encoder by simultaneously

pressing the UP

and DOWN

keys in the ''Main Menu''.

P/T Homing Mode

Lets you set the initial projector Reset mode.

1) Press

, the current setting appears on the display.

2) Use the UP

and DOWN

keys to select one of the following

settings:

Standard: Pan & Tilt are simultaneously reset.

Sequenced: Tilt is reset first followed by Pan.

3) Press

to confirm the selection or LEFT

to keep the current setting.

Pan Home Def Pos

Lets you assign the Pan channel “home” position at the end of Reset,

without a DMX input signal.

1) Press

, the current setting appears on the display.

2) Use the UP

and DOWN

keys to select one of the following settings:

0 degree

90 degrees

180 degrees

270 degrees (default)

3) Press

to confirm the selection or LEFT

to keep the current setting.

Tilt Home Def Pos

Lets you assign the Tilt channel “home” position at the end of Reset,

without a DMX input signal.

1) Press

, the current setting appears on the display.

2) Use the UP

and DOWN

keys to select one of the following settings:

12.5%

25%

50% (default)

75%

87.5%

100%

3) Press

to confirm the selection or LEFT

to keep the current setting.

OPTIONS MENU

Pan / Tilt

nvert

Swap

an-Tilt

Off

ncoder

an-Tilt

Off

Invert

ilt

Off

P/T Homing

Mode

Standard

Sequenced

Pan Home

Def Pos

Tilt Home

Def Pos

amp Dmx

ption

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 35 36

Commentaires sur ces manuels

Pas de commentaire

Clay-paky ALPHA WASH 700 Manuel d'utilisateur Page 18

Commentaires sur ces manuels

Produits connexes et manuels pour Projecteurs Clay-paky ALPHA WASH 700